This 40' x 50' Iron Sleek DYI Skating Rink Kit includes everything you require (except the wood) to build your very own backyard rink. Skip the Guesswork and turn an expert job into a fun winter skating rink project...then get out there and create family memories!

PRODUCT INCLUDES

• One Iron Sleek 40' x 50' Skating Rink Kit.
• One 45' x 55' Iron Sleek 6mil All-White Liner.
• 32 Iron Sleek Rink Brackets.
• 8 Iron Sleek Corner Brackets.
• All necessary Hardware.
• This kit does NOT come with the boards. We recommend 18pc. of 2" x 12" x 10' lumber.
• AVOID DELAYS: ensure your CREDIT CARD and BILLING addresses MATCH.

OPTIONAL

• Round Brackets to create rounded corners.
• Topper for the the boards.
• Cove to cushion and protect your liner bottom.
• Hard Court Brackets for mounting on concrete, wood or asphalt.
• Additional Iron Sleek Brackets for 4' spacing.
• Contact us FOR ANY CUSTOM SIZE Rink Kit!

DESCRIPTION

Build your own backyard ice rink with Iron Sleek’s engineered outdoor ice rink products. These ice rink liners are top of the line, and also available is an innovative hockey board options that will provide you with value you cannot find elsewhere. Highest quality, incredible durability and sleek design for easy storage in the off-season.

• Includes the components required to build a backyard rink.
• Takes an expert job and makes it easy for everyone.
• Where other solutions are bulky, lack versatility, and are not cosmetically appealing this system creates a successful and attractive rink with a clean finished look.
• The design eliminates the trip hazards cross-member around the outside of the rink.
• Will support boards up to a water level of 18".
• Allows you to build rinks in locations with up to 15" of pitch.
• Brackets are specifically engineered for building backyard ice rinks and to blend in with the rink enclosure.
• Steel-construction brackets provide the necessary strength to support the force of water and ice.
• The contour of the bracket is designed to grab the earth so the bracket stays in the ground.
• The brackets are rigid yet compact allowing for ease of shipping and off-season storage.
• Utilizes high-quality 6 mil Co-Poly tri-layer ice rink liner (perfect for making ice rinks).

Choosing The Right Kit

When choosing among the different sized backyard hockey rink kits, keep in mind that your rink does not need to be the exact size of the kits listed below. You just need to make sure that you choose a kit that has a big enough liner. For example if you want to build a 28' x 46' rink, the right kit for you is the Iron Sleek 30' x 50' rink kit. If you want to build a 36' x 65' foot rink a 40' x 70' foot Iron Sleek Rink Kit is for you. Basically, the rink you want must be able to fit completely inside of the rink kit that you buy. This is definitely a case of bigger is better. A little extra liner is always a good thing.

USAGE

Note: Does not include the necessary lumber. The information provided on this page assumes the use of 2" x 12" x 10' lumber which is widely considered the most cost effective method of attaining a functional sheet of ice. 2" by 12"'s require fewer Iron Sleek brackets because of their rigidity and will require fewer cuts, if any.

Another common choice is 3/4" plywood which is a better choice for rinks that have a long section of very high water and for rinkers who want more of an enclosure feel. Although plywood will cost a bit more money for the boards and will require more Iron Sleek brackets because it lacks rigidity, it is still well worth it. Some other benefits of Plywood over 2" by 12" lumber is for stacking and storage on the off season and it is lighter to handle.

On the contrary, plywood requires a little extra work, money, and skill. Plywood boards come in 4’ by 8’ sheets. The most common practice is to rip them in half with a circular saw and to support the boards minimally with an Iron Sleek bracket at the seams and every 4 feet. In addition, it is critical to bind the tops with Iron Sleek Mending Channel at all seams. The good news is that the local lumberyard may rip the plywood for you. Ripping plywood is not as easy as it seems. Ask someone skilled for help or ask the lumber store to do it for you. Plywood has very sharp corners so BE SURE TO USE IRON SLEEK BASE COVE to protect the bottom of your liner. Base Cove is truly a rink saver.

GET AN OFFICIAL QUOTE • WE CAN MAKE ANY CUSTOM SIZE YOU NEED!

To receive an official quote with shipping for a custom size, we REQUIRE the following information. HELP US...HELP YOU.

• Your liner length and width:
• First and Last Name:
• Phone Number:
• Billing information:
• Shipping information (if different):
• Confirmation that the shipping location is a business or home delivery:
• Confirmation if you have a shipping dock or forklift at the shipping location:
• Submit your responses to our xHockeyProducts Canada EMAIL (click).