Synthetic Ice Buying Guide: How to Choose xSynthetic Ice in Canada
Choose xSynthetic Ice for your space, expected traffic and connection needs. Compare the four xGlide options, plan fitted coverage and delivery in Canada, and request a quote for your selected configuration.
Plan Your Synthetic Ice Surface
- Choose the application. Tell us whether you are planning a home training area, shooting lanes, a commercial skills studio or a permanent rink, and whether it will be indoors or outdoors.
- Measure the usable space. Record its length and width, doors, obstructions and the equipment you want to use. A panel footprint is not the same as a complete facility layout.
- Compare the connection systems. Match the system to your traffic, site conditions and need to move or reconfigure the surface. H-Lock connectors for xGlide18 are priced separately.
- Confirm the fitted quantity and delivery. Use the sizing image on the selected product page, then request a quote for your measured area and freight receiving method.
Four xGlide Options at a Glance
| Model | Thickness | Tile Size | Weight | Lock | Best For |
|---|---|---|---|---|---|
| xGlide8 | 8 mm (5/16 in) | 102 cm × 102 cm (40.15 in square) | 18 lbs | Interlocking tile | Home and light residential use: garages, basements, shooting pads |
| xGlide10 + Enhanced Lock | 10 mm | 102 cm × 102 cm | 20.5 lbs | Enhanced Lock | Medium-heavy duty: serious home setups and light commercial use |
| xGlide15 + Enhanced Lock | 15 mm (3/5 in) | 102 cm × 102 cm | 40 lbs | Enhanced Lock | Heavy-duty commercial: training facilities, community rinks, goalie creases |
| xGlide18 + H-Lock | 18 mm (7/10 in) | 100 cm × 75 cm | 36 lbs | H-Lock | Heavy-duty commercial panel for large, high-traffic surfaces and severe climate or temperature swings. H-Lock connectors are priced separately; total panel and connector cost depends on your layout. |
Compare panel thickness and connection system together with your intended use. Consider the traffic, site conditions and whether the surface will be moved or reconfigured, then confirm the selected system and fitted quantity with your quote.
For light-traffic home use on a solid, flat, level surface, compare xGlide8 with the thicker xGlide10 + Enhanced Lock. For a commercial training space, compare the traffic and connection requirements of xGlide10 and xGlide15. xGlide18 + H-Lock is a heavy-duty option for permanent surfaces. Its separate connectors and fitted panel quantity depend on the final layout, so ask us to confirm the system for your application.
How sizing works
Measure the width and length of your area in feet. The xGlide8, xGlide10 and xGlide15 tiles are nominally 40.15 inches square (102 cm × 102 cm), but the connection systems vary which impacts the overall dimension once connected. Separately, xGlide18 panels are exactly 39.37 in × 29.52 in (100 cm × 75 cm) as they are connected with H-Locks. To assist, each of our product pages has a length and width calculation image to help you determine how many panels are required for your intended area. This provides a visual snapshot into understanding the cost of creating your space. Don’t worry, when you complete the quote form, our team will ensure that you have enough material to cover the area you specify.
Surface Preparation and Installation Planning
The current xGlide8 and xGlide10 product descriptions specify a solid, flat, level surface. For an outdoor project, include drainage, temperature movement and site preparation in your planning. Before preparing the base, ask us to confirm the installation requirements for your selected system and site. Do not assume every panel or connection system uses the same clearances or preparation method.
Cleaning Your xGlide Surface
Use cold water and a stiff brush to remove embedded dirt and debris. Do not use hot water. If you use a pressure washer, use cold water, avoid the high-pressure setting and keep the nozzle at least 12 inches from the surface.
These cleaning instructions come from the current xGlide product pages. Follow the instructions for the system supplied with your order.
Goal Creases
Goal creases are available for every option within our xSynthetic Ice lineup and are specifically designed to completely lock into their respective system for safety.
Warranty Listed on the Canadian Product Pages
The glide enhancer is infused throughout the panel material rather than applied only as a surface coating. The product pages below publish the following warranty information. Select your exact product to review its current information and confirm the applicable coverage and full conditions for your intended use when requesting a quote.
| Product | Published Warranty Information |
|---|---|
| xSynthetic Ice xGlide8 | Manufacturer home warranty: Lifetime replacement due to defects or premature wear. Manufacturer commercial warranty: Five (5) year replacement due to defects or premature wear. |
| xSynthetic Ice xGlide10 + Enhanced Lock | Ten (10) years indoors and five (5) years outdoors. |
| xSynthetic Ice xGlide15 + Enhanced Lock | Ten (10) years indoors and five (5) years outdoors. |
| xSynthetic Ice xGlide18 + H-Lock | Ten (10) years indoor and Five (5) years outdoors. |
Coverage differs by product and use. The xGlide8 entry distinguishes manufacturer home and commercial warranties; the other listed entries distinguish indoor and outdoor terms. Confirm the full terms for your selected product and installation with your quote.
Shipping and delivery in Canada
This product ships on a pallet via freight carrier to each address across Canada. Canadian orders are shipped from Canadian warehouses and all prices on xHockeyProducts.ca are in Canadian dollars. When we prepare your quote we ask how you can receive freight, as this directly affects the carrier fees:
- Home delivery with a lift gate (where available to your location), or hand unloading the truck yourself.
- Business delivery with a lift gate, a shipping dock, or a forklift on site. A dock or forklift reduces costs.
Original Project Example: Bauer & St. Louis Blues Skills Center
At Centene Community Ice Center in St. Louis, Missouri, USA, our published project record describes four shooting lanes on xSynthetic Ice with NHL creases. The skills studio also includes two Total Game Changers, two Accu-Nets, a Dangle Zone and a Radar Zone, plus custom tarps and retractable netting.
Explore the published skills-studio layout, then ask us which current xGlide system fits your facility. See the Centene installation and published equipment layout.
Frequently Asked Questions
What is the difference between xGlide15 and xGlide18?
xGlide15 + Enhanced Lock is a heavy-duty option for commercial training spaces. xGlide18 + H-Lock is intended for heavy-duty, permanent surfaces and uses separate H-Lock connectors. Tell us your area, expected traffic, indoor or outdoor conditions, and whether you need to move or reconfigure the surface. H-Lock connectors are priced separately; total panel and connector cost depends on your layout.
Is there a minimum order?
Confirm the initial-order minimum for your selected xGlide product when requesting a quote. If you are extending an existing surface, include your current model and the additional area you want to cover so we can confirm a compatible quantity.
Can xSynthetic Ice be used outdoors in a Canadian winter?
Yes, every option is UV-protected and our line-up provides a connection system for each specific application. Outdoor projects require additional planning for drainage, temperature movement, and site preparation. This being said, the right system may also be used as a base to freeze over in winter.
Do I skate on it with normal ice skates?
Yes, standard ice hockey skates work on xSynthetic Ice. Since there is more resistance than refrigerated ice, your coach may consider this a training benefit.
How much does a synthetic ice rink cost in Canada?
The fitted cost depends on your selected xGlide system, measured area, required connectors and freight delivery. H-Lock connectors for xGlide18 are priced separately. Use the sizing image on your selected product page, then request a quote with your area and receiving method so we can confirm the panel quantity and delivered configuration.
How do I clean xSynthetic Ice?
Use cold water and a stiff brush to remove embedded dirt and debris. Do not use hot water. If you use a pressure washer, use cold water, avoid the high-pressure setting and keep the nozzle at least 12 inches from the surface.
Ready to start? Open the product page for xGlide8, xGlide10, xGlide15 or xGlide18 and use the Get an Official Quote button, or start from the Synthetic Ice category or the Request a Quote page.